Balluff - BDD-06-1 BIN/BCD 6FIG LED DISPLAY

16MM, 7 Segment, 6 Digit LED Display

This LED display from Balluff has been designed for displaying the position which a BTL transducer has been detected and sent to the BTA processor. From the processor, data is sent in a parallel format to the display and control inputs can select BCD or binary as the data format and determine the location of the decimal point.
This display is intended for use only with BTA processors from Balluff and is ideal for control cabinet installations. The decimal position, the zero point and the combination of inputs and outputs can be set via the function keys on the front side depending on the application.

LED Display Features

• Function Display module 6 digit, 7 segments, red 16mm high figures
• Interface port 01 BCD/binary code, 37 pin Sub D connector
• Data format BCD code max. 20 bit, binary code max. 16 bit
• Input resistance PULL-DOWN . 10 k Ohm
• Strobe signal min. 100 ns low-active
• Supply voltage +24 Vdc, current draw 80mA
• Dimensions 96 x 48 x 107mm
• Installation depth 160 mm
• Ambient temperature 0 - 45 °C
• IP rating (front housing) IP40
• Approval/Conformity CE