Bussmann - AAO20 BOLTED TAG FUSE, LOW VOLTAGE, 20A, 550VAC, HRC, BS88, BRITISH STANDARD, FUSE SIZE A2, GG

Low Voltage Bolted Tag Fuse, 20A, 550VAC, HRC, BS88

This low voltage bolted tag fuse is a HRC cylindrical fuse that is fitted with brackets which allow the fuse to be bolted onto a fuse holder. This British Standard BS88 is used within installations as a sacrificial link and is designed to break when a fault occurs, such as an overcurrent or short circuit. Low power loss, typically 20% lower than the requirements of BS88. The fuse is suitable for low-voltage 3-phase electrical systems, such as those found in industrial engineering and automotive manufacturing applications.

Eaton Bussmann's fuses can be found within a multitude of industrial and switchgear applications, electrical equipment, wiring systems and circuit breakers. These fuses are specifically designed for the protection of general industrial applications such as power distribution, cable protection, motor protection. Featuring good peak let-through current limitation and gG characteristics for cable protection. Air-tight so not adversely affected by external environmental conditions for improved reliability.

The low-temperature rise means the fuse is suitable for high-density mounting, and this fuse link has been specifically designed for the protection of industrial equipment and conforms to industry standards.

British Standard Fuse Features

• Current rating 20 A
• Fuse size A2
• Voltage rating 550 VAC
• AA0 Series
• High rupture capacity (HRC)
• Breaking capacity – 80 kA at 550 VAC
• Suitable for three-phase applications
• Application category - gG
• Fixing centres 73 mm
• Overall length 85 mm
• Fuse dimensions 13.7 x 35.5 mm
• Standards/approvals – BS88, IEC 60269