Foxtam - EBP1201 MIDLAND JAY THERMISTOR RELAY, 110VAC, MOTOR PROTECTION, OVER TEMPERATURE, THERMISTOR

Midland Jay Thermistor Relay, Motor Protection, Over Temperature

The EBP1201 thermistor control relay can be used in conjunction with any standard motor protection thermistor or multiple of 3 thermistors to provide an accurate method of signalling a motor over temperature condition. motor over temperature condition.

This provides a more effective means of motor protection than a thermal of motor protection than a thermal overload as it is based on the actual overload as it is based on the actual temperature of the motor windings.  

The output from the unit is in the form of volt-free relay contacts. Providing the motor temperature is satisfactory the output relay will energise. In the event of a motor over-temperature the output relay will release. The unit will reset automatically (output relay energised) when the temperature returns to normal. returns to normal.

The relay will also release if either an open or short circuit fault is detected in the wiring to the motor thermistors.

Thermistor Relay Features

• Supply Voltage - 110Vac
• Frequency - 50/60Hz
• Trip level - 3100 ?
• Reset level - 1650 ?
• S/C trip level - 30 ?
• Relay contacts - Single-pole changeover
• Contact rating - 250Vac 3A, 250Vac 1A
• Isolation Voltage - 2kV ac for 1 minute
• Power Consumption - 1 W
• Temperature range   -10°C to +60°C
• Construction - Din rail mounted housing to IP20
• Dimensions - HxWxD – 86x22x96 mm