Sick - SKM36-HFA0-K02 MOTOR FEEDBACK SYSTEM ENCLOSURE, 128PPR SINE/COSINE, 12 BIT, MULTITURN, 6.5 TO 8MM TAPERED SHAFT, M4 THREAD, SPRING MOUNT STATOR COUPLING

Motor Feedback System Encoder, 128ppr Sine/Cosine, 12 Bit, Multiturn

The SKM36 encoder is an optical motor feedback system, with 128 sine/cosine signals per revolution, and comes with the HIPERFACE interface. Featuring over 16.5 million steps, spring mounting plate and stator coupling, and a 1.792 byte memory. Absolute position indication with an increment number of 4,096 increments per revolution and a maximum of 4,096 revolutions.

This encoder features a very small code disk with only a 2 mm code track radius which allows for holistic scanning. This means that the unavoidable eccentricity errors of the code disk, ball bearing and shaft that occur with conventional systems are compensated for by the system.

High angular speeds are not limited by the code disk thanks to the arrangement of the code disk in the middle of the rotary axle. As a bonus the small dimension allows manufacturers of low-power and minimal-power motors to considerably reduce the size of their motors.

Storage of motor-specific data in the electronic type label and programming are valuable features of this of encoder. The motor feedback system certified to SIL2/PL d meets current requirements regarding safety technology, making the certification process easier.

Feedback System Encoder Features

• 128 sine/cosine periods per revolution
• Number of steps - 16,777,216
• Absolute position with a resolution of 4,096 increments per revolution
• Sine/cosine periods per revolution – 128
• Supply voltage range 7 to 12 VDC
• Tapered shaft 6.5mm to 8 mm diameter
• M4 thread
• Measuring step – 2.5 Winkelsekunden, 12 Bit
• Flange type  – spring mounting plate / stator coupling
• Programming of the position value and electronic type label
• M12 male connector 8 pin, radial
• HIPERFACE interface
• Certified according to SIL2/PL d (only valid for SKS36S/SKM36S-H...)
• Conforms to RoHs